Here you will find the SRweb user instructions/help information for the SRweb Application. If you need more assistance than what is available here, please email SRweb Support or call 360-570-2426.
|Selecting a Region||SRweb Controls List||Selecting a Route|
|Selecting an Image||Viewing Road Images||More about SRweb|
SRweb Additional Features
At the top left of SRweb's main window is the Select A Region Map.
The following table contains a list of SRweb controls used while viewing images and an explanation of what those controls do:
|Show the highway log for the region selected on the "Select a Region" map|
|Select to view images in the increasing (North or East) milepost direction|
|Select to view images in the decreasing (South or West) milepost direction|
|Move view forward by jump factor|
|Move view backwards by jump factor|
|Set milepost interval between images|
On the left of the SRweb main window, under the Select a Region Map, is the Route Window.
Step 2: Click on the Dropdown Arrow in the Route Box and click the appropriate state route.
For this example, 410 Mainline is the selected state route.
Step 3: After the state route is selected, click the button in the Route Window.
The Highway Log of the selected state route will appear at the bottom of SRweb's main window. The Highway
Log has five columns: Accum Miles, Mile Post, Feature, LR, and Description. The table below explains the
highway log columns in more detail.
|Accum Miles||The route mile accumulated from the beginning of a State Route in the direction of the roadway|
|Mile Post||Sequential number, in designated direction of travel, of 1/100 mile increments|
|Feature||Feature of the road at the corresponding milepost|
|LR||Left/Right indicator showing location of feature in relation to increasing direction of roadway|
|Description||Description of Feature|
The image corresponding to the previously selected milepost should now be visible in SRweb's main window.
For this example, milepost 49.00 is selected.
Note: SRweb images can only be displayed one at a time.
To exit SRweb, close the web page by clicking the "X" button in the top right of the main window.
For questions or comments regarding SRweb, please Email SRweb support or contact (360) 570-2426.
SRweb is an application which runs on your Internet browser. The menu options at the top of the window are for
your Internet browser, not SRweb. However, you can perform the following features through your Internet Browser:
To copy an image, right click on the image. A shortcut menu will appear. Drop down and click on Copy. This
will copy the current image to the Windows Clipboard. From the Clipboard, you can then paste the image to any Windows application that accepts images.
To Email an image, right click on the image. A shortcut menu will appear. Drop down and click on Copy.
Create a new message through the Email application you are using. Right click and Paste the image into
Internet Explorer 6 users can right click on an image and choose E-Mail Picture... to Email an image.
To print an image, right click in the white portion of the frame where the image is located. A shortcut menu will appear. Drop down and click on Print. The print dialog box will appear. Click on the Options tab. In the Print
Frame, select "Only the selected frame" and click on Print.
To save an image, right click on the image. A shortcut menu will appear. Drop down and click on Save
Picture As. The image will save as a .JPG image by default.